Concrete Scarifier Accessories Drum, Shafts, Washers And 8pt Tct
Cutter
1) Specification:
CF-2514 Product features
5 Point / Teeth / Spike / Tips TCT Tungsten Carbide Points
O.D. 43 mm x I.D. 15.5 mm x Width 6mm
O.D. 1.69" I.D. 0.61" Width 0.24"
Finish: Zinc place coating
Hardness: 46-55
Premium OEM Quality Scarifier Accessories and Consumables
2) Our full dimension sheet:
| Products Lists |
| ITEM | DESCRITION | SPEC. |
| Tip Number | O. D | I. D | Width | Carbide Tip Dimension | N.W. |
| TCT Carbide Flail cutters |
| Y1005 | 5pt TCT Flail Carbide Cutter | 5 | 43 mm | 16 mm | 6 mm | 4*8.5 mm | 0.038kg |
| Y1006 | 6pt TCT Flail Carbide Cutter | 6 | 47 mm | 15.5 mm | 6 mm | 4*8.5 mm | 0.048kg |
| 6 | 47 mm | 17mm | 6 mm | 4*8.5 mm | 0.047kg |
| 6 | 47 mm | 20 mm | 6 mm | 4*8.5 mm | 0.041kg |
| Y1006-1 | 6pt TCT Flail Carbide Cutter | 6 | 56.9 mm | 17.3 mm | 6 mm | 4*8.5 mm | 0.083kg |
| 6 | 56.9 mm | 25 mm | 6 mm | 4*8.5 mm | 0.071kg |
| Y1008F | 8pt TCT Flail Carbide Cutter | 8 | 58.3 mm | 17.6 mm | 6 mm | 4*8.5 mm | 0.075kg |
| Y1008B | 8pt TCT Flail Carbide Cutter | 8 | 60.3 mm | 20 mm | 6 mm | 4*8.5 mm | 0.085kg |
| 8 | 60.3 mm | 18 mm | 6 mm | 4*8.5 mm | 0.081kg |
| 8 | 60.3 mm | 22 mm | 6 mm | 4*8.5 mm | 0.079kg |
| 8 | 60.3 mm | 25.8 mm | 6 mm | 4*8.5 mm | 0.074kg |
| Y1008D | 8pt TCT Flail Carbide Cutter | 8 | 82.5 mm | 30 mm | 8 mm | 4*8.5 mm | 0.217kg |
| Y1012A | 12pt TCT Flail Carbide Cutter | 12 | 80 mm | 26 mm | 8 mm | 4*8.5 mm | 0.224kg |
| Y1012B | 12pt TCT Flail Carbide Cutter | 12 | 80 mm | 30 mm | 8 mm | 4*8.5 mm | 0.224kg |
| Full Face Carbide Cutters-- Wide Teeth |
| F2006 | 6pt Full Face Carbide Cutter | 6 | 47 mm | 15.5 mm | 6 mm | 6*6*3 mm | 0.048kg |
| F2008 | 8pt Full Face Carbide Cutter | 8 | 60.3 mm | 20 mm | 6 mm | 6*6*3 mm | 0.087kg |
| F2016 | 12pt Full Face Carbide Cutter | 16 | 82 mm | 26.5 mm | 8 mm | 10*8*3 mm | 0.285kg |
| Milling cutters |
| LQ-80 | 6pt Carbide Milling Cutter | 6 | 80 mm | 30 mm | 19 mm | 3*11*19 mm | 0.482kg |
| LQ-55 | 6pt Carbide Milling Cutter | 6 | 55 mm | 18 mm | 19 mm | 3*7*18.5mm | 0.251kg |
| LQ-60 | 6pt Carbide Milling Cutter | 6 | 60 mm | 25 mm | 19 mm | 2*6*21.5mm | 0.35kg |
| LQ-40 | 5pt Carbide Milling Cutter | 5 | 40 mm | 15 mm | 22 mm | 2*6*21.5mm | 0.138kg |
| Full Hardened Steel Cutters |
| QG-C | 12pt Hardened Beam Steel Cutter-blunt tip | 12 | 41.9 mm | 16.2 mm | 3.1mm | N/A | 0.015kg |
| QG-B | 18pt Hardened Star Steel Cutter-sharp tip | 18 | 31 mm | 7 mm | 2.5 mm | N/A | 0.012kg |
3) Application:
•Cleaning and Texturing concrete and asphalt
•Removal of paint, rust, grease, ice deposits, line markings, and
concrete laitance
•Concrete reduction and scabbling
•Removal of roof chippings
•Grooving applications
•Cleaning concrete formwork and shuttering
•Non-slip finishes
•Removal of concrete and plaster droppings
4) Product description
Our TCT carbide flail scarifier cutters are used for leveling,
grinding, cleaning, grooving, milling, and other general surface
preparation with all kinds of scarifier and concrete planer
machines. And also they can work excellently to remove traffic
lines, pavement markings, epoxy, paint, and waterproofing
membranes. We use premium quality tungsten carbide for our flail
cutters so as to last up to 30 times longer and remove up to 5
times faster than traditional steel scarifier cutters.
We keep a full range of stock for TCT cutters, beam flails ,milling
cutters,scabbler bits and other spares for your cutter drums and
flail shafts to fit your equipments.
