Mk Scarifier Drums Cutting Wheels And Parts Five Tooth Carbide Tip
Star
Welcome to our products!
We offer durable accessories and spare parts for concrete
scarifiers, concrete scarifying machines,concrete planers machines,
concrete milling machines, floor grinders, floor scabblers, ranging
from replacement TCT tungsten carbide cutters/flails,milling
cutters,scabbler bits, full steel star and beam cutters and other
ODM accessories. They are perfectly compatible with brands EDCO
Multi-plane,Bartell BEF planers, Blastrac
scarifiers,SASE,HTC,Trelawny TFP planers, Airtec
scarifiers,Kindex,Scanmaskin and other scarifiers and floor
planers.
If you can provide below information, we can assist quickly for the
right accessries:
-the brand and model of your concrete scarifiers/ floor planers
equipment
-the drum shaft diameter
-the cutter outer diameter/ inner hole diameter
Below are the standard sheet to help you to choose the correct
tools for your scarifiers floor planers:
| Scarifier type | standard accessories | qty each set | Compatible scarifiers |
6" scarifiers
150mm planers | 5pt TCT carbide flails
5 teeth milling cutters | 76pcs TCT /set 84pcs TCT/set
20-40pcs milling/set | Von Arx® - FR200 Von Arx® - VA25 - 12mm Airtec® - RT - 2000 SASE® - SC10E - 12mm MK® - SGII / SG5 / SG9 Sase® - SC8E Bartell® - SP8 Bartell®BEF 200 General Equipment® - SP8 Kut-Rite® - KR8 Blastrac BMP-215 SCARIFIER Trelawny TFP 200 RANGE |
8" scarifiers
200mm planers | 5pt TCT carbide flails
6pt TCT carbide flails 6pt TCT Flat Face flails
5 teeth milling cutters | 76pcs TCT/set 84pcs TCT/set 100pcs TCT/set
About 40pcs Milling/set |
10" scarifiers
250mm planers | 6pt TCT carbide flails
8pt TCT carbide flails 8pt TCT Flat Face flails
5 teeth milling cutters | 105pcs TCT/set
108pcs TCT/set
120pcs TCT/set About 40pcs Milling/set | Kut-Rite® - KR10 Sase® - SC10E - 9/16" Edco® - CPM-10 - 5/8" EGM 25-10 Husqvarna® - CG 200 S - 1/2" Blastrac - BMP-265 SCARIFIER Trelawny-FLOOR SCARIFIER TFP 260 Airtec - RT - 2500
Airtec - RT - 2500 Duo
Airtec - RT 3200
Airtec - RM 320 |
12" scarifiers
300mm planers | 6pt TCT carbide flails
8pt TCT carbide flails
6 teeth milling cutters | 108pcs TCT/set
120pcs TCT/set
160pcs TCT/set About 40pcs Milling/set |
14" scarifiers
350mm planers | 8pt TCT carbide flails
12pt TCT carbide flails
6 teeth milling cutters | 100~230pcs TCT /set About 40pcs Milling/set | Edco® - CPU-12 Sase® - SC12E Von Arx® - VA30 Trelawny-SCARIFIER TFP 320 Edco® - CPU-10FC Airtec® - RT 3200 Airtec® - RM 320 Blastrac - BMP-335 SCARIFIER |
Five Tooth Carbide Tip Star
- Used for grinding, leveling, grooving, cleaning, and preparing
concrete
- Five-point carbide tips (1-3/4" OD x 5/8" ID)
- Longer life than steel tooth cutters, average of 6000 to 8000
square feet
- Maximum cutting rate is 1/8" per pass
Six Tooth Carbide Tip Star
- Used for grinding, leveling, grooving, cleaning, and preparing
concrete
- Six-point carbide tips (1-3/4" OD x 5/8" ID)
- Exceptional life, average of 8000 to 10000 square feet
- Maximum cutting rate is 1/8" per pass
18 Tooth Steel Sharp Tooth Cutter
- Used for general cleaning of concrete or asphalt including removal
of paint, epoxy, urethane, adhesive, and heavy dirt, grease and oil
deposits
- 18 tooth hardened steel, (2" OD x 5/8" ID)
- Average life of 500 to 800 square feet
- Maximum cutting rate is 1/16" per pass
12 Tooth Steel Blunt Tooth Cutter
- Used for paint and oil removal, traffic and shop floor safety-line
removal, cleaning and concrete preparation
- 12 tooth, hardened steel (2" OD x 9/16" ID)
- Average life of 500 to 800 square feet
- Maximum cutting rate is 1/16" per pass
Applications:
•Paint removal
•Grooving concrete
•Milling / scabbling / planning concrete
•Thermoplastic & coldplastics removal on asphalt & concrete
Various types of cutters are available to suit all the different
kinds of applications.
-Tungsten Carbide Tipped Cutter -for all concrete texturing,
scabbling, planing and grooving applications.
-Star Cutters -for the removal of paint, coatings and laitance.
Deck descaling.
-Beam Cutters -for the removal of paint, coatings, laitance,
grease, dirt and ice deposits. Deck descaling.
-Milling Cutter -for the removal of thermoplastic road and runway
markings, bituminous and rubber deposits.
Support:
If you are a distributors/tool hire company/technical
engineer/contractors for surface prep machines, we will be able to
provide all kinds of tool replacement on your concrete milling
scarifiers, floor grinding machines or floor planers for you. For
any technical data or help, pls contact us right now and we will
reply within 24 hours.
For more information about the dimensions, please kindly refer to
below data to help you choose the most suitable cutter part for
your scarifiers planers. And you can visite us at :
www.scarifier-cutters.com for more information.
