Contracting Hire Maintenance And Repairs Floor Planers Tct Drum
Milling Star Flails
We offer durable accessories and spare parts for concrete
scarifiers, concrete scarifying machines,concrete planers milling
machines, floor grinders and scabblers.ranging from TCT tungsten
carbide cutters/flails,milling cutters,scabbler bits, full steel
star and beam cutters and other ODM accessories, perfectly
compatible with brands EDCO, Bartell BEF,Blastrac,SASE,Airtec,
Trelawny TFP planers, Kindex,Scanmaskin and other scarifiers and
floor planers.
To assist you fastly for right tools, pls advise below:
-concrete scarifiers/ floor planers brand and model
-drum shaft diameter
-cutter O.D*I.D and tip number
Below are the standard sheet to help you to choose the correct
tools for your scarifiers floor planers:
Scarifier type | standard accessories | qty each set | Compatible scarifiers |
6" scarifiers
150mm planers | 5pt TCT carbide flails
5 teeth milling cutters | 76pcs TCT /set 84pcs TCT/set
20-40pcs milling/set | Von Arx® - FR200 Von Arx® - VA25 - 12mm Airtec® - RT - 2000 SASE® - SC10E - 12mm MK® - SGII / SG5 / SG9 Sase® - SC8E Bartell® - SP8 Bartell®BEF 200 General Equipment® - SP8 Kut-Rite® - KR8 Blastrac BMP-215 SCARIFIER Trelawny TFP 200 RANGE |
8" scarifiers
200mm planers | 5pt TCT carbide flails
6pt TCT carbide flails 6pt TCT Flat Face flails
5 teeth milling cutters | 76pcs TCT/set 84pcs TCT/set 100pcs TCT/set
About 40pcs Milling/set |
10" scarifiers
250mm planers | 6pt TCT carbide flails
8pt TCT carbide flails 8pt TCT Flat Face flails
5 teeth milling cutters | 105pcs TCT/set
108pcs TCT/set
120pcs TCT/set About 40pcs Milling/set | Kut-Rite® - KR10 Sase® - SC10E - 9/16" Edco® - CPM-10 - 5/8" EGM 25-10 Husqvarna® - CG 200 S - 1/2" Blastrac - BMP-265 SCARIFIER Trelawny-FLOOR SCARIFIER TFP 260 Airtec - RT - 2500
Airtec - RT - 2500 Duo
Airtec - RT 3200
Airtec - RM 320 |
12" scarifiers
300mm planers | 6pt TCT carbide flails
8pt TCT carbide flails
6 teeth milling cutters | 108pcs TCT/set
120pcs TCT/set
160pcs TCT/set About 40pcs Milling/set |
14" scarifiers
350mm planers | 8pt TCT carbide flails
12pt TCT carbide flails
6 teeth milling cutters | 100~230pcs TCT /set About 40pcs Milling/set | Edco® - CPU-12 Sase® - SC12E Von Arx® - VA30 Trelawny-SCARIFIER TFP 320 Edco® - CPU-10FC Airtec® - RT 3200 Airtec® - RM 320 Blastrac - BMP-335 SCARIFIER |
Various tool replacement optional:
Scarifier Milling Cutters are utilized for removing thick and soft
materials such as mastic, thermoplastic, waterproofing mem-branes, cold plastic coatings, glues and the like. It leaves the
surface smooth and ready for preparation, and is often used to
remove the bulk of material prior to using a carbide-tipped cutter.
Utilize the Milling Cutter for traffic line removal, epoxy removal,
thermoplastic removal, waterproofing membrane removal, cold plastic coatings
removal and general scarification. Long lasting, removes all types
of materials and leaves a smooth finish. Fits all machines
Steel Cutters are the most economical tools in the market, and
leave a long-lasting smooth finish. They are ideally used on
lighter prepa-ration work while getting ready for coating applications or removal
of surface materials like carpet foam backing, adhesives, mastics, glues, rust from steel decks and some thin mill coatings. Good for
general cleaning of concrete and asphalt surfaces, traffic line
removal, paint and light coating removal, adhesives removal, stripping of
compacted dirt, grease and oil deposits and de-rusting, de-scaling and ship decks. Available in blunt or sharp
tooth configurations and fits all machines.
Where to use
•Paint removal
•Grooving concrete
•Milling / scabbling / planning concrete
•Thermoplastic & coldplastics removal on asphalt & concrete
Various types of cutters are available to suit all the different
kinds of applications.
Why choose us
- Inexpensive.
- Versatile; do most jobs.
- Leave an extremely smooth surface.
- Last longer, save downtime vs. other steel cutters.
- Especially effective on layered dirt and grease.
- Available in blunt or sharp tooth configurations.
- Fit all machines.
Compatible:
8” SCARI-LITE MINI-PLANER CPM-8
10” WALK BEHIND SCARIFIER CPM-10
10” SELF PROPELLED SCARIFIER CPU-10FC
12” SELF PROPELLED SCARIFIER CPU-12
Support:
If you are a construction contractors or tool rental company, we
will be able to provide all kinds of tools replacement for your
concrete milling scarifiers, floor grinding machines or floor
planers for you. For any technical data or help, pls contact us at
email: carly@zzxinhe.com right now and we will reply within 24
hours.
